You are here > Groundwater Sampling
Groundwater Sampling

QED Environmental Systems manufactures the most complete line of air-powered groundwater sampling bladder pumps, groundwater remediation pumps, landfill leachate and methane condensate extraction pneumatic pumps, low profile air-strippers, and wireless remote data acquisition systems.

QED leads the industry in producing more accurate, cost effective ways to collect groundwater samples.

Portable Sampling Pumps
Power Pro ESPTM Electric Groundwater Sampling Pump
Sample Pro® Portable MicroPurge® Pumps and consultant kits.

Supplies & Accessories
Grab plates, ball stops, check balls, and tubing.


Low-flow Pump Controls
Exclusive MicroPurge® control mode uses simple arrow keys to adjust low-flow rates easily and repeatably.

Water Level Meters
The MicroPurge MP30 provides a unique and simplier way to assure drawdown control.

Purge Stabilization Flow Cells
QED PurgeScan™ Technology provides an easier and more accurate assurance of purge stabilization.

Compressors
Compact, oil-less compressor provides long-term durability and easy starting.

Disposable Sampling Filters
QuickFilters® provide ease of use and consistent, quality results.
Sort By:
Page of 1
The Impeller Kit is part of the Power Pro ESP System maintenance components and spare parts. Impeller Kit - Single

Power Pro ESP Impeller kit - single. Includes impeller and o-rings.

Our Price: $10.00
Power Pro ESP Inlet screen kit - includes screen, snap ring, and o-rings for inlet housing and impeller chamber. Inlet Screen Kit

Power Pro ESP Inlet screen kit - includes screen, snap ring, and o-rings for inlet housing and impeller chamber.

Our Price: $20.00
The Extended Power Supply Cable is an accessory for the Power Pro ESP system. Extended Power Supply Cable

Power Pro ESP Extended power supply cable, 25 feet, with battery clamps.

Our Price: $60.00
The Power Pro ESP Disposable 1/4" Tubing is part of the Power Pro ESP disposable tubing. Power Pro ESP Disposable 1/4" Tubing

Power Pro ESP 1/4" OD x 0.170" ID low-density polyethylene (LDPE) tubing, 500 ft roll.

Our Price: $60.00
The Impeller Kit (Pack of 10) is part of the Power Pro ESP System maintenance components and spare parts. Impeller Kit - Pack of 10

Power Pro ESP Impeller kit - pack of 10 impellers and o-rings.

Our Price: $90.00
The Power Pro ESP Disposable 3/8" Tubing is part of the Power Pro ESP disposable tubing. Power Pro ESP Disposable 3/8" Tubing

Power Pro ESP 3/8"OD x 1/4" ID low-density polyethylene (LDPE) tubing, 500 ft roll.

Our Price: $95.00
Disposable sample pump tubing - 1/4" OD single strand Disposable sample pump tubing - 1/4" OD single strand

Disposable sample pump tubing. 250' pre-packaged spool of 1/4" OD single strand, polyethylene tubing in a 5 gallon bucket.

Our Price: $108.00
Power Pro ESP 1/2" OD x 3/8" ID low-density polyethylene (LDPE) tubing, 500 ft roll. Power Pro ESP Disposable 1/2" Tubing

Power Pro ESP 1/2" OD x 3/8" ID low-density polyethylene (LDPE) tubing, 500 ft roll.

Our Price: $130.00
Easy Fittingâ„¢ Discharge Check Valve is an accessory for the Power Pro ESP system. Easy Fitting™ Discharge Check Valve

Easy Fitting discharge check valve (uses existing discharge barb fittings for all tubing sizes).

Our Price: $150.00
Drop Tube Inlet Kit is an accessory for the Power Pro ESP system. Drop Tube Inlet Kit

Power Pro ESP Drop tube inlet kit - Includes threaded inlet housing, 1/2" and 3/8" tubing barbs (2 each) and drop tube weight assembly

Our Price: $225.00
Disposable sample pump tubing - 1/4" x 1/4" OD continuous bonded Disposable sample pump tubing - 1/4" x 1/4" OD continuous bonded

Disposable sample pump tubing. 250' pre-packaged spool of 1/4" x 1/4" OD continuous bonded, polyethylene tubing in a 5 gallon bucket.

Our Price: $257.00
Disposable sample pump tubing - 1/8" x 1/4" OD skip bonded Disposable sample pump tubing - 1/8" x 1/4" OD skip bonded

Disposable sample pump tubing. 250' pre-packaged spool of 1/8" x 1/4" OD skip bonded, polyethylene tubing in a 5 gallon storage bucket. For the 3/4" Sample Pro pump.

Our Price: $257.00
Power Pro ESP Motor module replacement kit - includes motor/seal assembly and discharge head o-rings. Motor Module Replacement Kit

Power Pro ESP Motor module replacement kit - includes motor/seal assembly and discharge head o-rings.

Our Price: $595.00
Sample Pro portable MicroPurge pump 0.75 in Sample Pro portable pump. 0.75 in diameter pump

Sample Pro 0.75 in. portable MicroPurge pump. 1/8" air & 1/4" discharge push fittings.

Our Price: $1,125.00
Sample Pro 1.75 in. Sample Pro 1.75 in., (1/4 in. discharge, push-in fittings)

Sample Pro 1.75 in. portable MicroPurge pump. Compact pump designed specifically for portable low-flow sampling. Features easy disassembly without tools and quick-change disposable bladders. All stainless steel construction with 1/4" + 1/4" "Push-In" tubing connections.

Our Price: $1,335.00
Sample Pro 1.75 in. (3/8 in. discharge, push-in fittings) Sample Pro 1.75 in., (3/8 in. discharge, push-in fittings)

Sample Pro 1.75 in. portable MicroPurge pump. Compact pump designed specifically for portable low-flow sampling. Features easy disassembly without tools and quick-change disposable bladders. All stainless steel construction with 1/4" + 3/8" "Push-In" tubing connections.

Our Price: $1,335.00
Sample Pro 1.75., (1/4 in. discharge, compression fittings) Sample Pro 1.75 in., (1/4 in. discharge, compression fittings)

Sample Pro 1.75 in. portable MicroPurge pump. Compact pump designed specifically for portable low-flow sampling. Features easy disassembly without tools and quick-change disposable bladders. All stainless steel construction with 1/4" + 1/4" compression tube connection fittings.

Our Price: $1,435.00
Sample Pro 1.75 in. (3/8 in. discharge, compression fittings) Sample Pro 1.75 in., (3/8 in. discharge, compression fittings)

Sample Pro 1.75 in. portable MicroPurge pump. Compact pump designed specifically for portable low-flow sampling. Features easy disassembly without tools and quick-change disposable bladders. All stainless steel construction with 1/4" + 3/8" compression tube connection fittings.

Our Price: $1,435.00
Sample Pro portable MicroPurge pump  0.75 in. Sample Pro portable pump. 0.75 in. diameter pump with Kit

Sample Pro Consultants Kit. Includes the 0.75 in. diameter Sample Pro Pump Model SP-3/4-P and the pump expendables to sample 10 wells. Housed in a rugged tool box, kit includes 10 each: polyethylene bladders, stainless steel grab plates for 1/8" + 1/4" tubing, o-ring sets, Teflon check balls, plus a set of cleaning brushes, tubing cutter, and reusable air quick-connect.

Our Price: $1,465.00
The Power Pro ESP Electric Pump is a portable electric groundwater sampling pump system. Power Pro ESP Electric Pump

The Power Pro ESP Electric Pump is a portable electric groundwater sampling pump system.

Our Price: $4,732.85